前言：全氟烷氧基,AP-202 ,可溶性聚四氟乙烯,PFA AP-202 ,NEOFLON PFA
Neoflon PFA AP-202Generic Name: 全氟烷氧基 (PFA) - 提供方: DAIKIN INDUSTRIES, Ltd.NEOFLON PFA AP-202 is an ultra-high flowability fluororesin.It is suitable for extrusion molding of fine and thin wall electric wireIntroductionAP-202 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.Good melt flowability while maintaining excellent properties of PTFE. It can be melt-molded as a thermoplastic resin by injection molding and extrusion molding.Suitable for extrusion molding of extremely fine electric wires. It is also used for electric wires of personal computers and mobile phones.Excellent chemical resistance which is not affected by most of the chemicals.It retains flexibility without losing toughness under the environment from cryogenic to high temperature.Low dielectric constant and dielectric loss tangent in a wide range of temperature and frequency.It shows high electrical resistance and dielectric strength.Nonflammable like POLYFLON PTFE and NEOFLON FEP. outside for a long time.Non-stickiness. It shows excellent releasability and water repellency / oil repellency. 与典型值比较 - Upgrade to compare!单位: SI 总览材料状态已商用：当前有效资料 1Technical Datasheet (English)搜索 UL 黄卡DAIKIN INDUSTRIES, Ltd.Neoflon?供货地区北美洲非洲和中东拉丁美洲欧洲亚太地区特性共聚物良好的柔韧性流动性高耐候性，良好耐化学品性能，良好韧性良好用途电线电缆应用加工方法电线&线缆挤出成型注射成型物理性能额定值单位制测试方法密度 / 比重2.13g/cm?ASTM D792熔流率（熔体流动速率） (372°C/5.0 kg)68g/10 minASTM D3307机械性能额定值单位制测试方法抗张强度25.0MPaASTM D1708伸长率 (断裂)380%ASTM D1708热性能额定值单位制测试方法熔融温度301°CDSC